Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 53
- Pagina / 278
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuring and Customizing IGMP
117355-C Rev 00
3-21
Specifying the Lifetime of an Mtrace Cache Entry
IGMP creates entries in the forwarding cache specifically for the Mtrace utility.
By default, IGMP keeps these entries in the forwarding cache for a maximum of
30 seconds.
You can use the BCC or Site Manager to specify a different lifetime value from 30
to 8192 seconds.
Using the BCC
Navigate to the IGMP prompt for the interface and enter:
mtrace-lifetime
<seconds>
seconds
is an integer from 30 to 8192 seconds.
For example, the following command sets the Mtrace cache entry lifetime to 60
seconds:
igmp/2.2.2.2/3#
mtrace-lifetime 60
igmp/2.2.2.2/3#
Using Site Manager
To specify the lifetime of an Mtrace cache entry:
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
Multicast
. The Multicast menu opens.
4. Choose
IGMP/IGMP Relay
. The IGMP menu opens.
5. Choose
Interfaces
. The IGMP Interface Parameters window
opens.
6. Set the
Mtrace Entry Lifetime
parameter.
Click on
Help
or see the parameter
description on page A-23.
7. Click on
Apply
, and then click on
Done
. You return to the Configuration Manager
window.
- Configuring IP 1
- Multicasting and 1
- Multimedia Services 1
- Trademarks 2
- Restricted Rights Legend 2
- Statement of Conditions 2
- Contents 5
- 117355-C Rev 00 10
- Before You Begin 15
- Text Conventions 16
- Acronyms 17
- How to Get Help 19
- Chapter 1 21
- Multicast Host Groups 22
- Multicast Addresses 23
- Resource Reservation Protocol 24
- Bay Networks Resource Manager 24
- IGMP Relay 25
- Multicast Table Manager 25
- Chapter 2 27
- Starting IGMP 28
- Starting DVMRP 29
- Starting MOSPF 30
- Starting RSVP 31
- Chapter 3 33
- IGMP Concepts and Terminology 34
- IGMP Host Reports 35
- Host Leave Messages 35
- Customizing Global IGMP 36
- Enabling and Disabling IGMP 37
- Configuring Logging 42
- Enabling Join Acknowledgments 43
- Accepting a Nonlocal Report 45
- Specifying a Query Rate 48
- Configuring IGMP Policies 56
- Chapter 4 59
- Neighbor Connections 60
- Figure 4-1. Multicast Routers 61
- Source Route Advertisements 62
- How DVMRP Chooses a Route 63
- Routing Table 64
- Shortest-Path Trees 65
- Tree Pruning 65
- Customizing DVMRP Globally 66
- Setting the Update Interval 68
- Setting the Leaf Timer 77
- Specifying a Probe Interval 79
- Logging Debugging Messages 85
- Listening for a Default Route 100
- Using the BCC 101
- Using Site Manager 102
- Configuring a Tunnel 104
- Specifying the Cost 110
- Specifying a Threshold 111
- Advertising a Default Route 114
- Configuring DVMRP Policies 120
- Customizing DVMRP 121
- (continued) 122
- Configuring an Accept Policy 124
- Table 4-5 127
- Chapter 5 131
- MOSPF Overview 132
- • All multicasting types 133
- Configuring MOSPF Globally 134
- Enabling Dynamic TTL 139
- Chapter 6 143
- Configuring QOSPF 143
- Figure 6-1. QOSPF Topology 144
- Enabling Route Pinning 146
- Chapter 7 149
- Configuring RSVP 149
- How RSVP Works 150
- Configuring RSVP Globally 152
- Choosing a Slot 153
- Caution: 154
- Setting the TTL Override 159
- Setting the Route Delay Value 160
- Chapter 8 163
- Reserving Line Resources 163
- Resource Manager 164
- Supported Media 165
- Chapter 9 179
- Configuring IGMP Relay 179
- IGMP Relay Overview 180
- IGMP Relay Topology 181
- How IGMP Relay Works 182
- Appendix A 203
- Site Manager Parameters 203
- DVMRP Parameters 204
- DVMRP Interface Parameters 209
- DVMRP Tunnel Parameters 214
- IGMP Parameters 218
- IGMP Static Host Parameters 223
- IP Configuration Parameters 227
- Resource Manager Parameters 229
- OSPF Global Parameters 235
- OSPF Interface Parameters 238
- RSVP Parameters 239
- RSVP Interface Parameters 240
- Multicast Policy Parameters 243
- IGMP Group Policy Parameters 257
- Appendix B 267
- Multicasting Tools 267
- <retry_count> 270
- <timeout_count> 270
- For example, the following 272
Relacionado con productos y manuales para Redes Avaya Configuring IP Multicasting and Multimedia Services
Redes Avaya Configuring Line Services Manual de usuario
(268 paginas)
(268 paginas)
Redes Avaya E1 Manual de usuario
(52 paginas)
(52 paginas)
Redes Avaya BCM Imaging Tool Guía de usuario
(40 paginas)
(40 paginas)
Redes Avaya an Expansion Module in a BayStack ARN Router (114202 Rev. A) Manual de usuario
(40 paginas)
(40 paginas)
Redes Avaya BayRS Version 15.7.0.0 aviso
(80 paginas)
(80 paginas)
Redes Avaya SIP DECT Fundamentals Manual de usuario
(292 paginas)
(292 paginas)
Redes Avaya BCM450 Manual de usuario
(92 paginas)
(92 paginas)
Redes Avaya Nortel Business Communications Manager 450 1.0 Guía para resolver problemas
(102 paginas)
(102 paginas)
Redes Avaya BCM 3.6 Manual de usuario
(12 paginas)
(12 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales