Avaya Configuring IP Multicasting and Multimedia Services Manual de usuario Pagina 191

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 278
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 190
Configuring IGMP Relay
117355-C Rev 00
9-13
Using Site Manager
To configure upstream data forwarding:
Specifying the Relay Interface Type
Use the Type parameter to specify that the IGMP Relay interface is configured on
one of the following types of interface:
A downstream interface connecting the IGMP Relay device to IGMP hosts
(the default)
An upstream interface connecting the IGMP Relay device to the primary IP
multicast router
An upstream interface connecting the IGMP Relay device to the backup IP
multicast router
You can use the BCC or Site Manager to specify the interface type.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
IGMP/IGMP Relay
. The IGMP menu opens.
4. Choose
Global
. The IGMP Global Configuration window
opens.
5. Set the
Relay Upstream Forwarding
parameter. Click on
Help
or see the
parameter description on page A-20.
6. Click on
Save
. You return to the Configuration Manager
window.
Vista de pagina 190
1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 277 278

Comentarios a estos manuales

Sin comentarios