
Configuring IP Multicasting and Multimedia Services
3-22
117355-C Rev 00
Configuring a Static Host Entry
A network may include a member of a multicast group that is unable to register its
group membership with the local IGMP router, for example, a host that is a
member of a multicast group but that is not running IGMP.
In this situation, you can register the group member’s network statically on the
router.
A registration entry includes:
• A group address
• An address prefix length
•A circuit name
You can use Site Manager to supply this information.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
IGMP/IGMP Relay
. The IGMP menu opens.
4. Choose
Static Groups
. The IP IGMP Static Groups window
opens.
5. Click on
Add
. The IGMP Static Group window opens.
6. Set the following parameters:
•
Group Address
•
Prefix Length
•
Circuit Name
Click on
Help
or see the parameter
descriptions beginning on page A-21.
7. Click on
OK
. You return to the IP IGMP Static Groups
window.
8. Click on
Done
. You return to the Configuration Manager
window.
Comentarios a estos manuales