
Configuring IP Multicasting and Multimedia Services
A-62
117355-C Rev 00
Parameter: In Circuits
Path: Configuration Manager > Protocols > IP > Policy Filters > IGMP > Static
Forwarding Entries
Default: An empty list
Options: Leave empty or specify one or more 2-octet circuit numbers.
Function: Lists inbound circuits.
Instructions: If you do not want this circuit to accept any inbound packets, leave the value
for this parameter empty.
If you want this circuit to accept inbound packets, enter the circuit number or
numbers, in 2-octet strings.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.12.1.11
Parameter: Out Circuits
Path: Configuration Manager > Protocols > IP > Policy Filters > IGMP > Static
Forwarding Entries
Default: An empty list
Options: Leave empty or specify one or more outbound circuit number and
time-to-live (TTL) threshold octet combinations.
Function: Lists outbound circuits.
Instructions: If you do not want this circuit to forward any packets affected by this filter,
leave the value for this parameter empty.
To define a circuit number and TTL threshold from which you want to
forward packets, enter the octets as follows:
First 2 octets: circuit number
Next 2 octets: TTL threshold
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.6.12.1.12
Comentarios a estos manuales