
Site Manager Line Services Parameters
117344-A Rev. A A-11
Token Ring Line Parameters
Parameter: Enable
Path: Configuration Manager > TOKEN Connector > Edit Line > Edit Token Ring
Parameters
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the token ring circuit.
Instructions: Set to Disable if you want to disable the token ring circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.2
Parameter: MAC Address Override
Path: Configuration Manager > TOKEN Connector > Edit Line > Edit Token Ring
Parameters
Default: None
Options: Any valid, 48-bit MAC-level address
Function: Assigns a user-specified MAC address.
Instructions: If you want the router to generate the MAC address for this token ring interface,
ignore this parameter.
If you want to specify a MAC address (for example, to avoid host number
conflicts on a directly connected IPX or XNS network), enter the 48-bit MAC
address in MSB format; that is, enter 0x followed by 12 hexadecimal digits.
If you enter a MAC address with this parameter, you must set the MAC Address
Select parameter to CNFG.
MIB Object ID: 1.3.6.1.4.1.18.3.4.2.1.9
Comentarios a estos manuales