Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 66)

Configuring Ethernet, FDDI, and Token Ring Services

4-4 117344-A Rev. A

Using Site Manager

Complete the tasks in the following table to specify a MAC address override.

Specifying a MAC Address Source

By default, the token ring interface uses the MAC address stored in the

programmable read-only memory (PROM) on the link module.

You can set the source for MAC addresses on a token ring interface to:

• BOXWIDE -- The interface uses a MAC address that the software generates

from the router’s serial number.

• PROM -- The interface uses a MAC address from the PROM on the token ring

link module.

• CNFG -- You explicitly assign a MAC address with the MAC Address

Override parameter.

You can set the source for MAC addresses on a token ring interface only by using

Site Manager.

Site Manager Procedure

You do this System responds

1. In the Conﬁguration Manager window,

choose a TOKEN Connector.

The Edit Connector window opens.

2. Choose Edit Line. The Edit Token Ring Parameters window

opens.

3. Set the MAC Address Override

parameter. Click on Help or see the

parameter description on page A-11.

4. Click on OK. Site Manager returns you to the Edit

Connector window.

5. Click on Done. Site Manager returns you to the

Conﬁguration Manager window.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 93 94

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 66