
Site Manager Line Services Parameters
117344-A Rev. A A-7
Parameter: User Data
Path: Configuration Manager > FDDI Connector > Edit Line > Edit FDDI
Parameters > Expert > SMT Attributes > FDDI SMT Attributes
Default: None
Options: Any string up to 32 alphanumeric characters
Function: Allows you to enter additional information about the router. This information is
attached to the status information frames (SIFs).
Instructions: Enter up to 32 alphanumeric characters.
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.8
Parameter: Status Report Protocol
Path: Configuration Manager > FDDI Connector > Edit Line > Edit FDDI
Parameters > Expert > SMT Attributes > FDDI SMT Attributes
Default: Enable
Options: Enable
| Disable
Function: Specifies whether the node will generate Status Report Frames (SRFs) for its
implemented events (for example, high bit errors, topology changes, trace status
events, MAC frame error condition, port LER condition, and MAC duplicate
address condition).
Instructions: Accept the default, Enable, if you want the node to generate SRFs; specify
Disable if you do not want the node to generate SRFs. We recommend using
Enable to ensure that your FDDI network is ANSI-compliant.
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.14
Parameter: Trace Max Expiration (ms)
Path: Configuration Manager > FDDI Connector > Edit Line > Edit FDDI
Parameters > Expert > SMT Attributes > FDDI SMT Attributes
Default: 7000
Options: 6001 to 256000 milliseconds
Function: Specifies the maximum propagation time for a trace on an FDDI topology.
Instructions: Enter a value from 6001 to 256000. We recommend accepting the default value
of 7000 milliseconds (7 seconds).
MIB Object ID: 1.3.6.1.4.1.18.3.4.15.1.3.1.15
Comentarios a estos manuales