Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 49)

Configuring FDDI Services

117344-A Rev. A 3-13

Specifying the Propagation Expiration Time

A trace is a diagnostic function that isolates a fault on the ring. By default, the

maximum propagation time for a trace on a FDDI topology is 7 seconds. You can

set the propagation expiration time to a value from 6001 to 256000 milliseconds

(ms).

Using the BCC

To set the propagation expiration time, access an existing FDDI line service and

enter:

token-rotation-time

is the propagation expiration time expressed in seconds.

For example, to set the propagation expiration time to 10:

box> fddi slot 11 connector 1

fddi/11/1> token-rotation-time 10

Using Site Manager

Complete the tasks in the following table to set the propagation expiration time.

Site Manager Procedure

You do this System responds

1. In the Conﬁguration Manager window,

choose a FDDI Connector

The Edit Connector window opens.

2. Choose Edit Line. The Edit FDDI Parameters window

opens.

3. Choose Expert. The FDDI Advanced Attributes window

opens.

4. Choose SMT Attributes. The FDDI SMT Attributes window opens.

5. Set the Trace Max Expiration (ms)

parameter. Click on Help or see the

parameter description on page A-7.

6. Click on OK. Site Manager returns you to the FDDI

Advanced Attributes window.

(continued)

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 93 94

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 49