Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Getting Started
117344-A Rev. A
1-3
back
back
tokenring slot 9 connector 1
circuit-name O91
speed 4Meg
ip address 192.168.2.1 mask 255.255.255.0
arp
back
rip
back
back
back
To access line services, at the top-level box prompt use the output from the show
config command and enter:
interface_type
slot
slot_number
connector
connector_number
For example, to access the Ethernet line services on slot 13, connector 1 as shown
in the output from the
show config
command above, navigate to the top-level box
prompt and enter:
box#
ethernet slot 13 connector 1
To display the current values for the Ethernet line services, enter:
info
on box
state enabled
circuit-name E132
slot 13
connector 2
bofl enable
bofl-timeout 5
hardware-filter disable
transmit-queue-length 0
receive-queue-length 0
bofl-retries 5
bofl-tmo-divisor 1
bofl-number 0
interface_type
Name of a physical interface on the router
slot_number
Number of the slot on which the link module is located
connector_number
Number of a connector on the link module
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 93 94

Comentarios a estos manuales

Sin comentarios