Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 44

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 94
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 43
Configuring Ethernet, FDDI, and Token Ring Services
3-8 117344-A Rev. A
Using Site Manager
Complete the tasks in the following table to enable or disable hardware filtering
on a FDDI interface.
Editing FDDI SMT Attributes
The FDDI Station Management (SMT) standard defines the protocols for
managing the Physical Layer Media Dependent (PMD), the Physical Layer
protocol (PHY), and the media access control (MAC) components of FDDI. The
SMT protocols monitor and control the activity of each node on the ring. Bay
Networks routers support Version 7.2 of the SMT protocol. SMT contains three
components:
Connection Management (CMT)
Ring Management (RMT)
SMT frame services
The following sections describe how you can configure SMT.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose a FDDI Connector.
The Edit Connector window opens.
2. Choose Edit Line. The Edit FDDI Parameters window
opens.
3. Set the Hardware Filter parameter. Click
on Help or see the parameter description
on page A-5.
4. Click on OK. Site Manager returns you to the Edit
Connector window.
5. Click on Done. Site Manager returns you to the
Configuration Manager window.
Caution: Changing any of the FDDI Advanced Attributes parameters affects
the operation of your FDDI network. Before modifying these parameters, you
should understand how to use them to improve network performance.
Vista de pagina 43
1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 93 94

Comentarios a estos manuales

Sin comentarios