Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario descargar pdf (Pagina 61)

Configuring FDDI Services

117344-A Rev. A 3-25

The Transmit Queue Length

The transmit queue length determines the number of buffers that can be used to

transmit data. Set the value from 0 to 255 to determine the transmit queue length.

If you set the value larger than the compiled ring size, the router will truncate the

value at that size.

You can set the transmit queue length only by using the BCC.

Using the BCC

To set the transmit queue length, access an existing Ethernet line service and

enter:

transmit-queue-length

is a value between 0 and 255.

For example, to set the transmit queue length to 100:

box> ethernet slot 13 connector 1

ethernet/13/1> transmit-queue-length 100

The Receive Queue Length

The receive queue length determines the number of buffers that can be used to

receive data. Set the value from 0 to 255 to determine the receive queue length. If

you set the value larger than the compiled ring size, the router will truncate the

value at that size.

You can set the receive queue length only by using the BCC.

7. Click on Done. Site Manager returns you to the Edit

Connector window.

8. Click on Done. Site Manager returns you to the

Conﬁguration Manager window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 93 94

Sin comentarios

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual de usuario Pagina 61