Avaya Connecting BayStack AN and ANH Platforms to a Network Manual de usuario Pagina 73

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 168
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 72
Configuring Network Booting
4-13
Parameter: Connector State
Default: Enable
Options: Enable
| Disable
Function: Enables or disables Netboot on this interface.
When this parameter is set to Enable, any settings already entered in the
other four parameter boxes in the Netboot Interfaces window appear and
are noted by Site Manager so that Netboot occurs. If the setting is
Disable, Site Manager disregards the other parameters and the router
cannot Netboot.
Instructions: If you do not want Site Manager to use the settings on the Netboot
Interfaces window, set this parameter to Disable. If you want Site
Manager to use any of the other four parameters in the Netboot Interfaces
window (r
efer to Figure 4-2), you must set this parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.1
Vista de pagina 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 167 168

Comentarios a estos manuales

Sin comentarios