Avaya Connecting BayStack AN and ANH Platforms to a Network Manual de usuario descargar pdf (Pagina 58)

Connecting BayStack AN and ANH Systems to a Network

3-10

Adding a TFTP User for an HP 9000

Follow the instructions in this section only if you are using an HP 9000 as the Site

Manager workstation.

To add a TFTP user for the HP 9000, enter a line with the following syntax in your

/etc/passwd ﬁle. We recommend that you use root (/) as the TFTP home directory.

tftp::<user_id>:<group_no.>::/:/bin/false

For example:

tftp::510:20::/:/bin/false

Setting Up Static Routes to Next-Hop Routers

If your workstation requires static routes, use this section to specify a path to the

network by

• Editing the inetd.conf ﬁle

• Verifying the routes

• Loading the changes into memory

You must set up a static route for each path between the routers and the BOOTP

server’s next-hop router.

You may want to specify a static route in a multihop environment or in an

environment using routing protocols such as RIP, where minor routing update

delays may extend the time it takes to Netboot.

Caution: Do not insert a slash (/) in the cd tftpboot command; a symbolic link

cannot contain references to directories above the directory speciﬁed in the

tftpd command line. Use the -s ﬂag to provide additional security to your

network. (This ﬂag restricts TFTPD access to a speciﬁed directory.)

Note: We recommend that you not use the System Administration Manager

(SAM) utility as an alternative to entering the commands above.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 167 168

Sin comentarios

Avaya Connecting BayStack AN and ANH Platforms to a Network Manual de usuario Pagina 58