Avaya Configuring Line Services Manual de usuario Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
Customizing LAN Interfaces
114078 Rev. A 3-7
3. Proceed as follows, depending on the status of the transaction:
If negotiation or data transmission is taking place, click on OK.
The Auto Negotiation State Information window closes, and negotiation
or data transmission continues.
If there is a problem with the line, click on Restart.
This action resets all automatic line negotiation parameters and restarts
the line negotiation process.
Table 3-1. 100-Mb/s Ethernet Auto Negotiation State Information
Category State Displayed Description
Auto Neg State Auto Neg Process Completed The router and the endstation have
successfully negotiated a line speed and data
transmission is taking place.
Auto Neg Process Occurring The router and the endstation are currently
negotiating a line speed.
State Unknown The router and the endstation cannot begin
line negotiation, probably because the remote
station does not have automatic line
negotiation capability.
Agreed Speed 100Base-TX The line is processing at 100 Mb/s half-duplex.
100Base-TX Full Duplex The line is processing at 100 Mb/s full-duplex.
Remote
Capability
Any valid CSMA/CD line speed This indicates the line speed configuration that
the remote endstation is currently advertising
for this line.
Local Capability 100Base-TX This indicates the line speed or speeds that
the router is currently advertising for this line
(the current setting of the Line Advertising
Capabilities parameter).
100Base-TX Full Duplex
100Base-TX; 100Base-TX Full Duplex
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 300 301

Comentarios a estos manuales

Sin comentarios