Avaya Configuring Line Services Manual de usuario Pagina 241

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 240
Configuring Line Services
A-54 114078 Rev. A
Parameter: Primary Clock
Path: QMCT1 Connector > Edit Logical Lines > Port Details > MCT1 Port
Parameters
Default: Port 1 Ext Loop
Options: Internal
| Port 1 Ext Loop | Port 2 Ext Loop | Auxiliary Ext
Function: Identifies the primary source of the timing signals.
Instructions: Select Internal to use the clock chip on the link or net module.
Select Port 1 Ext Loop to use the signal coming from Port 1.
Select Port 2 Ext Loop to use the signal coming from Port 2.
Select Port 3 Ext Loop to use the signal coming in from Port 3 (QMCT1 only).
Select Port 4 Ext Loop to use the signal coming in from Port 4 (QMCT1 only).
Select Auxiliary Ext to use an external source via BNC connectors.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.18.1.3
Parameter: Secondary Clock
Path: QMCT1 Connector > Edit Logical Lines > Port Details > MCT1 Port
Parameters
Default: Internal
Options: Internal
| Port 1 Ext Loop | Port 2 Ext Loop | Auxiliary Ext
Function: Identifies the secondary source of the timing signals. The router uses the
secondary clock only when the primary clock becomes unavailable.
Instructions: Select Internal to use the clock chip on the link or net module.
Select Port 1 Ext Loop to use the signal coming from Port 1.
Select Port 2 Ext Loop to use the signal coming from Port 2.
Select Port 3 Ext Loop to use the signal coming in from Port 3.
Select Port 4 Ext Loop to use the signal coming in from Port 4.
Select Auxiliary Ext to use an external source via BNC connectors.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.18.1.4
Vista de pagina 240
1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 300 301

Comentarios a estos manuales

Sin comentarios