Avaya Configuring Line Services Manual de usuario Pagina 243

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 242
Configuring Line Services
A-56 114078 Rev. A
Parameter: BofL Timeout
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: 5 seconds
Options: 1 to 60 seconds
Function: Specifies the time between transmissions of BofL messages from this
synchronous interface. Timeout will occur if five periods elapse without both a
successful frame transmission and a successful reception. When timeout occurs,
the router disables and re-enables the synchronous line. For example, if you set
this parameter to 5 seconds, the interface must successfully transmit and receive
a frame within 25 seconds. Timeout occurs in 25 seconds.
This parameter is valid only if you set BofL to Enable.
Instructions: Either accept the default, 5 seconds, or specify a new value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.8
Parameter: MTU
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: 1600 bytes
Options: 3 to 4608 bytes
Function: Specifies the largest frame (Maximum Transmission Unit) that the router can
transmit on this line.
Instructions: Set this parameter to a value appropriate for your network. For X.25, use a value
at least 5 bytes more than the maximum packet size for the packet level.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.9
Vista de pagina 242
1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 300 301

Comentarios a estos manuales

Sin comentarios