Avaya Configuring Line Services Manual de usuario Pagina 213

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 212
Configuring Line Services
A-26 114078 Rev. A
Parameter: Scrambling
Path: ATM Connector > Line Attributes > ATM/ALC Parameters > Physical >
Physical Interface Attributes
Default: Enable
Options: Enable
| Disable
Function: Enabling scrambling randomizes cell payload sufficiently to guarantee cell
synchronization. If you select Disable, cell synchronization problems may
result.
Instructions: Select Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.2.11.1.5
Parameter: Loopback
Path: ATM Connector > Line Attributes > ATM/ALC Parameters > Physical >
Physical Interface Attributes
Default: Disable
Options: Enable
| Disable
Function: Specifies whether or not to use loopback diagnostic mode on this line. In
loopback diagnostic mode, the router retransmits received data to the sender.
Instructions: Select Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.2.11.1.7
Parameter: Cell Insertion
Path: ATM Connector > Line Attributes > ATM/ALC Parameters > Physical >
Physical Interface Attributes
Default: Unassigned
Options: Idle
| Unassigned
Function: In the absence of user cells, the framer device fills idle bandwidth with either
idle or unassigned cells.
Instructions: Select Idle or Unassigned.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.2.11.1.49
Vista de pagina 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 300 301

Comentarios a estos manuales

Sin comentarios