Avaya Configuring Line Services Manual de usuario Pagina 138

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 137
Configuring MCE1 and MCT1 Interfaces
114078 Rev. A 6-13
Setting the Primary Clock Source (QMCT1)
You can specify the primary source for timing signals:
Select Internal to use the clock chip on the MCT1 module.
Select Port 1 Ext Loop to use the signal coming in from Port 1.
Select Port 2 Ext Loop to use the signal coming in from Port 2.
Select Port 3 Ext Loop to use the signal coming in from Port 3.
Select Port 4 Ext Loop to use the signal coming in from Port 4.
Select Auxiliary Ext to use an external source via BNC connectors.
Setting the Secondary Clock Source (QMCT1)
You can specify a backup source for timing signals:
Select Internal to use the clock chip on the link or net module.
Select Port 1 Ext Loop to use the signal coming in from Port 1.
Select Port 2 Ext Loop to use the signal coming in from Port 2.
Select Port 3 Ext Loop to use the signal coming in from Port 3.
Select Port 4 Ext Loop to use the signal coming in from Port 4.
Select Auxiliary Ext to use an external source via BNC connectors.
Site Manager: Primary Clock parameter: page A-54
Site Manager: Secondary Clock parameter: page A-54
Vista de pagina 137
1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 300 301

Comentarios a estos manuales

Sin comentarios