Avaya Configuring Line Services Manual de usuario Pagina 244

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 243
Site Manager Line Services Parameters
114078 Rev. A A-57
Parameter: Promiscuous
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: Disable
Options: Enable
| Disable
Function: Specifies whether address filtering based on the local and remote address is
enabled. If you set this parameter to Enable, all frames are received. If you set
this parameter to Disable, only frames destined for this local address are
received.
Instructions: Set this parameter to Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.11
Parameter: Clock Source
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: External
Options: External
| Internal
Function: Specifies the origin of the synchronous timing signals (clock). If you set this
parameter to Internal, this router supplies the required timing signals. If you set
this parameter to External, an external network device supplies the required
timing signals. In most cases, this parameter should be set to External.
Instructions: Set this parameter to either Internal or External, as appropriate for your
network.
For direct connection to a control unit, such as an IBM 3174, set to Internal. For
connection to a modem, set to External. For direct connection to an IBM 3745,
either the router or the IBM 3745 can provide the clock source. If the IBM 3745
does not provide clocking, set to Internal.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.13
Vista de pagina 243
1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 300 301

Comentarios a estos manuales

Sin comentarios