
Site Manager Line Services Parameters
114078 Rev. A A-23
ATM FRE-2 Line Parameters
You access the ATM FRE-2 Line Parameters from the Configuration Manager.
Parameter: DS3/E3 Scrambling
Path: ATM Connector > Line Attributes > ATM ARE Line Driver Attributes
Default: On
Options: On
| Off
Function: If you select On, the router randomizes cell payload sufficiently to guarantee
cell synchronization. If you select Off, cell synchronization problems may
result.
Note that ATM devices with different scrambling settings cannot communicate.
For example, if you configure a router to enable scrambling, and configure a hub
to disable scrambling, the router and hub cannot communicate.
You can set this parameter only when using DS3 and E3 modules.
Instructions: Select On or Off. If you select On, be sure to enable scrambling for all devices
on the network. If you select Off, be sure to disable scrambling for all devices
on the network.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.22
Parameter: Enable
Path: ATM Connector > Line Attributes > ATM/ALC Parameters
Default: Enable
Options: Enable
| Disable
Function: Enables or disables the ATM ARE line driver.
Instructions: Select Enable or Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.23.3.2.1.2
Comentarios a estos manuales