
Site Manager Line Services Parameters
114078 Rev. A A-65
Parameter: Sync Media Type
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: Default
Options: Default
| T1 | E1 | RAISEDTR | V25BIS | ISDN | ISDNLEASEDLINE
Function: Specifies the signaling method that the router uses for this line.
Instructions: Select the media type appropriate for this line.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.54
Parameter: Idle RR Frames
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: Off
Options: On
| Off
Function: Indicates whether or not the router sends a receiver ready (RR) signal when the
Link Idle Timer expires.
Instructions: Accept the default or select On if you want the router to send RRs.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.61
Parameter: KG84A Cycle
Path: COM Connector > Edit Line > Edit Sync Parameters
Default: 100 milliseconds
Options: 5
| 10 | 25 | 50 | 100 | 200 | 500
Function: Specifies the timer cycle’s length, in milliseconds. This cycle value is used by
the timers on the other KG84A devices on the network. This also becomes the
polling cycle for monitoring FCS errors.
Instructions: Accept the default or select one of the valid options, and be sure to set the RTS
Enable parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.4.5.1.67
Comentarios a estos manuales