Avaya Configuring Line Services Manual de usuario Pagina 120

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 301
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 119
Customizing Synchronous and Asynchronous Interfaces
114078 Rev. A 5-25
Setting the Cable Type
If the synchronous interface is connected to a dial-up device for switched services,
you can specify the cable interface type of the device that connects the dial unit.
You can select one of the following cable types:
Null
RS232
RS422
V35
X21
By default, the Cable Type parameter is set to Null. You can set the cable type for
the interface.
Setting the Retry Timer
By default, the router waits 3 seconds for a response from the interface. When the
timer expires, the router
1. Sends Link Control frames.
2. Resends the frames up to the value of the Retry Count parameter.
3. Disconnects the link.
You can specify the length of time, to a value from 1 through 9999 seconds,
before the retry process begins by setting the value of the Retry Timer on the
interface.
Enabling or Disabling Extended Addressing
By default, the router does not test the address length of frames on a synchronous
interface. With the Extended Address parameter enabled, the router tests the first
bit of the address to determine the length of the address, in octets.
Site Manager: Cable Type parameter: page A-68
Site Manager: Retry Timer parameter: page A-61
Vista de pagina 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 300 301

Comentarios a estos manuales

Sin comentarios