
Site Manager Line Services Parameters
114078 Rev. A A-39
Parameter: Fractional Loopback
Path: Configured MCE1 or MCT1 Connector > MCE1/T1 Logical Lines
Default: Disable
Options: Enable
| Disable
Function: Specifies whether or not to use diagnostic loopback mode on this circuit. In this
mode, the router retransmits received data to the sender.
Instructions: Select Enable only if you want the port in loopback mode.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.6.1.10
Parameter: WAN Protocol
Path: Configured MCE1 or MCT1 Connector > MCE1/T1 Logical Lines
Default: Standard
Options: For MCE1: Standard
| PPP | SMDS | Frame Relay | SDLC
For MCT1: Standard
| Passthru | PPP | SMDS | Frame Relay
Function: Specifies the WAN protocol you configured for this logical line.
Instructions: Accept the current value.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.6.1.14
Parameter: Service
Path: Configured MCE1 or MCT1 Connector > MCE1/T1 Logical Lines
Default: LLC1
Options: Transparent
| LLC1
Function: Sets the HDLC service type for this line. Transparent is basic HDLC mode.
LLC1 adds the HDLC address and control fields as a prefix to the frame.
Instructions: Select the logical line HDLC service.
MIB Object ID: 1.3.6.1.4.1.18.3.4.9.6.1.15
Comentarios a estos manuales