Avaya Media Processing Server Series System (Software Release 2.1) Manual de usuario Pagina 264

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 306
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 263
Avaya Media Processing Server Series System Reference Manual
Page 264 # P0602477 Ver: 3.1.11
Resetting the NIC
The NIC can be reset by doing either a hard or soft reset. A hard reset momentarily
removes power from the NIC, allowing it to reboot when power is reapplied. To do a
hard reset on the NIC, press and release the reset button on the edge of the NIC. (See
NIC Edge View on page 260.)
A soft reset of the NIC, is done at the command line in a V-shell. Move to the
tmscomm.N component and enter
ncd nicbpsreset ‘<NicCh> <NICType> <bps> <toggle_hold>’
where:
NicCh = Chassis in which NIC is present (1, 2, ... 12)
NICType = Type of NIC - master <m> or slave <s>
bps = Slot to reset (7 or 8)
toggle_hold = (uint32): Set to 1 for toggle, 0 otherwise
(Note that arguments are enclosed in single quotes (‘’).)
To determine which NIC is currently set as the master/slave, use the ncd
systemstatus command.
Example:
ncd nicbpsreset ‘2 m 7 0’
Resets the master NIC in chassis 2, slot 7. The value of toggle_hold is not
important. The preceding help information can be displayed in a V-shell while in a
commN component by entering ncd help nicbpsreset.
Vista de pagina 263
1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 305 306

Comentarios a estos manuales

Sin comentarios