Avaya Media Processing Server Series System (Software Release 2.1) Manual de usuario descargar pdf (Pagina 261)

Configuration Procedures and Considerations

# P0602477 Ver: 3.1.11 Page 261

3. Verify the items are set as follows in ROM:

a. IP address of NIC will be obtained from /etc/bootptab file

b. Watchdog timer is ENABLED.

4. If displayed values are all correct, select (C)ontinue option by typing

c. To modify any current settings:

a. Select (M)odify option by typing ‘m’:

b. Hit <R

ETURN> to accept current values of items to remain

unchanged.

NIC-2000 Rom Version V3.0, Checksum = 0x0413497c

nic_rom.elf, Release 1.0.0.57 [04/11/00 02:05:49 PM]

-----------------------------------------------------------------------

---

STARTUP MODE:

Run Application

NETWORK INTERFACE PARAMETERS:

LAN IP address will be obtained from etc/bootptab file

LAN interface’s subnet mask is 0xffff0000

HARDWARE PARAMETERS:

Serial channels will use a baud rate of 9600

This board's Ethernet hardware address is 00:80:01:B0:00:25

This board's clock frequency is 28 MHz, bus ratio is 1:1

This board has 32 Megabytes of DRAM

SOFTWARE WATCH DOG TIMER STATUS:

The watch dog timer is ENABLED and will timeout / RESET in 60 seconds.

TFTP BOOT LOADER PARAMETERS:

The IP and download file to start will come from the /etc/bootptab file

STARTUP DELAY:

Will wait 5seconds before start up to allow parameter modifications

-----------------------------------------------------------------------

---

To change any of this, press Enter, Return, or space key within 3 seconds

(M)odify any of this or (C)ontinue? [C]

(M)odify any of this or (C)ontinue? [M] m

1 2 ... 256 257 258 259 260 261 262 263 264 265 266 ... 305 306

Sin comentarios

Avaya Media Processing Server Series System (Software Release 2.1) Manual de usuario Pagina 261