Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 53)

Installing Site Manager on a PC

7-7

From disks

To load Distinct from a disk:

1. Insert the Distinct TCP/IP disk into the disk drive.

2. Select File➔Run.

3. Enter the following in the Command Line box to install the Distinct TCP/

IP Run Time software:

<drive>

setup

<drive> speciﬁes the drive (for example, A or B) in which you inserted the

Distinct TCP/IP Run Time disk.

The Distinct installation process prompts you for path and directory

information for installing the software. Accept the default suggestions unless

you have reason to change.

The process then prompts you for the information you prepared in the

previous sections about

• Serial number and key code

• Network interface card and driver

• Network conﬁguration

For speciﬁc questions about the Distinct conﬁguration process, refer to the

Distinct TCP/IP for Microsoft Windows Run Time Installation and

Conﬁguration Guide. Also refer to the sample installation in Appendix B.

4. At the end of the Distinct installation accept the prompt to reboot the PC.

You reboot the PC to load the TCP/IP stack and set up the environment

variables.

5. Enter Windows. The Distinct Group window is open on the desktop.

6. Proceed to the section “Testing Distinct TCP/IP”and test the Distinct

TCP/IP conﬁguration before installing Site Manager.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 53