Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 50)

Quick-Starting Routers and BNX Platforms

7-4

Preparing Network Interface Card and Driver Information

The Distinct installation process prompts you for the network interface card

installed on your PC, the card driver, and the driver type you want to use. Driver

types are

• NDIS

• ODI

• Packet

Normally, driver types NDIS and ODI involve less conﬁguration than the Packet

type.

Distinct and other applications include standard card drivers with their software.

An incorrect or outdated driver generates an error message such as Bind Failed

upon reboot. If this happens, verify from the network interface card

documentation that you selected the right card model, driver, and driver type. Try

using the driver supplied on disk with the card or contact the card manufacturer

(via FTP) for the latest update to the driver.

If Distinct doesn’t support your driver, refer to the section “Configuring the

System for Your Own Ethernet or Token Ring Driver” in Chapter 2 of the Distinct

TCP/IP for Microsoft Windows manual.

If you have a laptop PC and are using a Xircom Pocket Ethernet Adapter to fulﬁll

the NIC system requirement, we recommend selecting the “NDIS Driver over

Ethernet” procedure in Chapter 2 of the Distinct manual.

Depending on your network interface card, you may also be prompted to change

information about

• Hardware interrupt

• I/O base address

• Memory address

• Transceiver

Accept the defaults for this information unless you have a reason for making a

change.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 50