Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 23)

2-1

Chapter 2

Filling Out the Network Information Worksheet

You ﬁll out a Network Information Worksheet to refer to when you perform the

Quick-Start installation script (

install.bat

) as described in Chapter 6. (See

Appendix A for a sample installation script.)

The installation script prompts you for network information to connect the router

or BNX platform to the IP network. The worksheet contains space for the advance

information you will need when running

install.bat

Use only the portions of the worksheet that apply to your network requirements.

For example, if you are not enabling OSPF on the IP interface, pass over any

questions that pertain to OSPF.

Many steps in the installation script suggest default values. Accept the default

values unless you have a reason to make a change.

Some steps are optional for your network requirements. For example, local PAP

passwords are optional with PPP. Also, if you don’t run optional features such as

FTP or Telnet, your router will be more secure and use less memory and

processing overhead.

The examples on the Network Information Worksheet reﬂect information from the

sample network in Figure 2-1.

Note:

Contact your network administrator for assistance in selecting

worksheet options. AN and ANH

™

routers are not covered by this worksheet.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 23