Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 113)

B-1

Appendix B

Sample TCP/IP Stack and NIC Driver Installation

This appendix describes a test installation of Distinct TCP/IP and a NIC driver on

a PC, presented here as an example only. Your installation steps will vary

depending on the PC, network interface card, and network you use. Refer to the

Distinct Corporation and network-interface card documentation for more details.

To install Distinct TCP/IP, it was necessary to:

1. Obtain the latest NDIS driver for our Ethernet network interface card.

The ﬁrst time we performed Steps 2 to 14, we received a message that Distinct

does not supply the needed driver for our network-interface card. Distinct

does supply a driver for many cards, but sometimes you may have to use the

driver supplied with the card or obtain the latest update.

We made an FTP connection to the manufacturer and downloaded the latest

driver (elnk3.dos) to a disk that we used in step 15.

Similarly, if you install a driver and get the message “Bind failed,” you may

have to update the driver software that came with your card.

2. Remove interfering network management software.

Because we wanted to test a new installation, we eliminated interference from

an old version of Distinct and other networking software on our test computer

• Deleting the old Distinct directory

• Making backup copies of the autoexec.bat and conﬁg.sys ﬁles

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 113