Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 25)

Filling Out the Network Information Worksheet

2-3

Table 2-1. Network Information Worksheet

Requested Information Example Your Information

Physical Connector Information

Enter the slot number containing the link module that

provides the initial IP network interface (this module can

reside in any slot that is designated for link module

support).

Note: You also provide the module number for the ASN

(example - Module1).

2 QE/NF

Number of the connector (port) providing the initial IP

network interface.

1. XCVR1

Circuit Information

Enter the number of the circuit name. 1. E21

IP Interface Conﬁguration Information

IP address of this initial network interface.

(Advanced users only –

install.bat

supports unnumbered

interfaces.)

192.168.125.34

Subnet mask address of this initial network interface (in

dotted decimal notation).

255.255.255.0

Does this interface connect to the same local area

network (LAN) as the Site Manager workstation?

IP Routing Protocol Information

IP Routing Protocol to conﬁgure to manage this router

remotely. This is necessary only if you answered No to

the previous question.

See the following sections for details on the IP Routing

Protocol you choose to conﬁgure.

RIP

RIP Conﬁguration Information

Should RIP listen to the default route to the network or

subnet where Site Manager is located?

Ye s

(continued)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 25