Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 33)

4-1

Chapter 4

Connecting to the IP Network

When you ordered your router or BNX platform, you also ordered a cable to

connect the router or BNX platform to the IP network. Connect it using the

following procedure:

1. Connect the cable to your router or BNX platform.

Table 4-1 gives the standard ports (also called connectors) for initially

connecting the router or BNX platform to the IP network.

You can conﬁgure any port on a router or BNX platform for the initial IP

connection by modifying the connection port in the Quick-Start installation

script described in Chapter 6.

For information on the location of the port on your router or BNX platform,

refer to the installation manual that came with your router or BNX platform.

2. Connect the cable to the IP network.

The connection depends upon your LAN or WAN conﬁguration.

Table 4-1. Initial Connection Port to the IP Network

Bay Networks Router or BNX

Platform

Default Connection Port

AFN/ES XCVR1 port

AFN/TS MAU1 port

ASN Any port on any net module, excluding the Stack

Packet Exchange (SPX) Module

FN, ALN, LN, CN, BLN, BCN First port on the ﬁrst link module (Slot 2 except

BCN)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 33