Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 106)

Quick-Starting Routers and BNX Platforms

A-2

When you are finished with this procedure, the router will be able to

communicate with the Site Manager workstation over the IP network. You

are then ready to install Site Manager Software, as described in

Chapter 4 of the Quick-Start Guide.

Each procedure step requires you to do one of the following things:

1. Enter a number that corresponds to a selection.

2. Enter 'y' for Yes; 'n' for No; 'q' for Quit.

3. Enter a word or phrase referred to as a "text string"

4. Enter <Return> to accept default displayed in [].

You must press the <Return> key after entering one of the above responses.

Press <Return> to Continue, q<Return> to Quit:

------------------------------------------------------------------------

Preliminary Information You Need to Know

----------------------------------------

Before you begin this procedure, you should gather the network

information listed below:

You Need to Know This Information: For Example:

---------------------------------- ------------

Type of Link Module connecting the router's DSDE

IP network interface to the Site Manager.

Slot number where the Link Module resides. 2

Communication type and connector number Ethernet XCVR1

IP address of initial IP network interface 192.32.10.189

Subnet mask of initial IP network interface 255.255.255.0

IP address of Site Manager workstation 192.32.10.100

Do you wish to continue? (y/n)[y]:

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 106