Avaya Quick-Starting Routers and BNX Platforms Manual de usuario descargar pdf (Pagina 110)

Quick-Starting Routers and BNX Platforms

A-6

FTP default volume is 2:

------------------------------------------------------------------------

Step 6. Enable TELNET

Enable the Technician Interface via TELNET

------------------------------------------

Do you want to enable TI TELNET? (y/n)[n]:

------------------------------------------------------------------------

Configuration Summary

---------------------

Link Module: QE/NF

Connector: 1

Slot: 2

Circuit Name: E21

IP address: 192.168.135.100

IP subnetwork mask: 255.255.255.224

Routing Protocol: RIP

Default Rt. Listen: No

TFTP Default Volume: 2:

FTP Default Volume: 2:

TI TELNET: No

Press [RETURN] to continue:

------------------------------------------------------------------------

Step 7. Specify a name for the configuration file.

Save configuration to a file.

-----------------------------

The Quick-Start configuration of the router is now complete and active.

Do you wish to save this configuration to a file? (y/n)[y]:

Default file name is startup.cfg on the current volume.

NOTE: Do *NOT* name this file 'config'. Later, you may wish to rename

this file 'config' after you perform a named boot and verify its

operation.

Enter file name [startup.cfg]:

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 119 120

Sin comentarios

Avaya Quick-Starting Routers and BNX Platforms Manual de usuario Pagina 110