Avaya VoIP Monitoring Manager Reference Release 3.1 Manual de usuario descargar pdf (Pagina 15)

Avaya VoIP Monitoring Manager Reference

Configure System-Parameters IP-Options Form

You must configure two Switch Administration Forms (SAT) on Avaya Communication Manager

to send RTCP reports to the RTCP Monitor. These forms are called the system-parameters ip-

options form and the ip-network-region form.

Configuration for the system-parameters ip-options form

Set the RTCP MONITOR SERVER, Default Server IP Address to the address of the Windows

2000 PC running the VoIP Monitoring Manager Server.

Make one port available

The VMM client and server communicate using Java Remote Method Invocation (RMI), and uses

the port 1099 on the machine on which the VMM server is running.

If this port is not available, the VMM server will attempt to use the following ports: 49177, 51173,

or 63006. Although it is unlikely that all of these ports will be in use on a single machine, please

ensure that at least one of these ports is available.

Check Windows SNMP Agent is Installed and Running

The Windows SNMP Agent must be installed before you install the VoIP Monitoring Manager

Server. If Windows SNMP Agent is not installed already, you are prompted during the VoIP

Monitoring Manager installation to install it from the Windows CD.

NOTE:

If the Windows SNMP Agent is not installed or is not running, you will experience problems

receiving data.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 113 114

Sin comentarios

Avaya VoIP Monitoring Manager Reference Release 3.1 Manual de usuario Pagina 15