Avaya Connecting ASN Routers and BNX Platforms to a Network Manual de usuario Pagina 78

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 106
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 77
Connecting ASN Routers and BNX Platforms to a Network
4-6
Configuring an Ethernet Interface for Network Booting
To configure an ASN Ethernet interface for network booting, use the following
command format:
ifconfig
[-s
<slot no.>
] [-d]
<interface> [<IP address> <subnet mask>]
Table 4-3 describes the ifconfig
command arguments for configuring the router’s
Ethernet interface.
<subnet mask>
Specifies the IP subnet mask of the interface you set with
<interface>
.
Provide this address in dotted decimal notation.
<next hop
address>
Specifies the IP address of the next-hop router. Provide this address
in dotted decimal notation. You only need to specify this address if
there are intermediate routers between the router and the BOOTP
server.
Table 4-3. ifconfig Command Settings for an Ethernet Interface
Setting Description
Slot Setting
-s
<slot no.>
Specifies the slot containing the interface you want to configure. The
slot corresponds to the ASN slot ID, which can be 1 through 4. If you
omit this argument, ifconfig uses the current slot.
Default Setting
-d Resets the router’s IP interface settings to the default values.
Resetting an Ethernet interface makes it inactive in the network
booting process. (The output of the getcfg command shows the
default as “None.”)
IP Connector Setting
<interface>
Specifies the IP connector you are configuring.
Use xcvr<
network module no.
><
port no.
>.
IP Address Settings
<IP address>
Specifies the IP address of the interface you set with
<interface>
.
Provide this address in dotted decimal notation.
<subnet mask>
Specifies the IP subnet mask of the interface you set with
<interface>
.
Provide this address in dotted decimal notation.
Table 4-2. ifconfig Command Settings for a Synchronous Interface
Setting Description
Vista de pagina 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 105 106

Comentarios a estos manuales

Sin comentarios