
Configuring Network Booting
3-11
Netboot Interface Parameters
Parameter: Slot Number
Default: None
Range: 1 to 4
Function: Specifies the assigned slot number for the physical slot in which the net
module for this connector is installed.
Instructions: Type the appropriate slot number in the Slot Number box.
MIB Object ID: None
Parameter: Module Number
Default: None
Range: 1 to 4
Function: Specifies which net module supports the connector.
Instructions: Type the appropriate module number in the Module Number box.
MIB Object ID: None
Parameter: Connector
Default: None
Options: COM1
| COM2 | XCVR1 | XCVR2
Function: Identifies the connector configured as a Netboot interface.
Instructions: Enter the connector name for the Netboot interface. To use Netboot over a
synchronous interface, enter COM1 or COM2. To use Netboot over an
Ethernet interface, enter XCVR1 or XCVR2.
MIB Object ID: None
Comentarios a estos manuales