Avaya Connecting ASN Routers and BNX Platforms to a Network Manual de usuario descargar pdf (Pagina 58)

Connecting ASN Routers and BNX Platforms to a Network

3-8

Parameter: Boot Image Pathname

Default: None

Options: A valid image ﬁle pathname

Function: When the parameter Boot Image From Network is set to Enable, this

parameter speciﬁes the absolute pathname of the boot image ﬁle on the

TFTP server.

When you Netboot the router, this parameter shows the full path to the

active image on the remote server. When you boot an ASN locally, the

name of the active image (wfHwEntry.wfHwActiveImageName) appears

in the form <volume>:<image name>.

Instructions: Use this parameter only when conﬁguring Directed Netboot. Make sure

the ﬁle you specify is the valid image ﬁle on the TFTP server.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.4

Parameter: Boot Conﬁg Pathname

Default: None

Options: A valid conﬁguration ﬁle pathname

Function: When the parameter Boot Conﬁg From Network is set to Enable, this

parameter speciﬁes the absolute pathname of the boot conﬁguration ﬁle

on the TFTP server.

Instructions: Use this parameter only when conﬁguring Directed Netboot. Make sure

the ﬁle you specify is the valid conﬁguration ﬁle on the TFTP server.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.1.5

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 105 106

Sin comentarios

Avaya Connecting ASN Routers and BNX Platforms to a Network Manual de usuario Pagina 58