Avaya Connecting ASN Routers and BNX Platforms to a Network Manual de usuario descargar pdf (Pagina 62)

Connecting ASN Routers and BNX Platforms to a Network

3-12

Parameter: Connector IP Address

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP address of the remote netbooting router that is using

EZ-Install. This parameter applies only to a Frame Relay group access

PVC connection.

Instructions: Enter the IP address of the remote netbooting router’s interface, in dotted

decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.4

Parameter: Connector Subnet Mask

Default: None

Options: The Conﬁguration Manager automatically calculates an appropriate

subnet mask, depending on the class of the network to which the interface

connects. However, you can change the subnet mask with this parameter.

Function: Speciﬁes the network and subnetwork portion of the 32-bit IP address of

this interface.

Instructions: Either accept the assigned subnet mask or enter another subnet mask, in

dotted decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.5

Parameter: Connector Next Hop

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP address of the next-hop router connected to this interface.

When the router starts up, the next-hop router passes the BOOTP requests

and responses that initiate the transfer of the image or conﬁguration ﬁle

between the router and the BOOTP server. If the router and BOOTP

server are on the same IP subnet, you do not have to set this parameter.

Instructions: Enter the IP address of the next-hop router connected to the interface you

are adding, in dotted decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.6

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 105 106

Sin comentarios

Avaya Connecting ASN Routers and BNX Platforms to a Network Manual de usuario Pagina 62