Avaya Troubleshooting Routers Guía para resolver problemas descargar pdf (Pagina 235)

Using the Technician Interface to Configure and Run Packet Capture

308656-14.00 Rev 00

B-41

Parameter: Disable

Attribute Name: wfPktCaptureDisable

Attribute Number: 2

Default: 1 (Enable)

Options: 1 (Enable)

2 (Disable)

Function: Controls the state of the Packet Capture instance.

Instructions: Disabling an instance frees all resources allocated for the instance. If you

previously allocated a file stored in buffer memory, disabling the instance

is an easy way to free the file stored in buffer memory and to keep the

MIB instance for future captures.

MIB Object ID: 1.3.6.1.4.1.18.3.4.21.1.1.2

Parameter: State

Attribute Name: wfPktCaptureState

Attribute Number: 3

Default: 1 (Up)

Options: 1 (Up)

2 (Down)

3 (Init)

4 (Not present)

Up: An interface has registered and is enabled.

Down: An interface has registered, but has been disabled.

Init: Packet Capture is loaded on the slot, but there is no interface

registered for this instance.

Not present: Packet Capture is not loaded on the slot with which this

instance is connected.

Function: Indicates the state of the Packet Capture subsystem.

MIB Object ID: 1.3.6.1.4.1.18.3.4.21.1.1.3

1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 267 268

Sin comentarios

Avaya Troubleshooting Routers Guía para resolver problemas Pagina 235