Avaya Troubleshooting Routers Guía para resolver problemas descargar pdf (Pagina 226)

Troubleshooting Routers

B-32

308656-14.00 Rev 00

Getting the Name of the Packet Capture File

To get a Packet Capture file stored in the router’s memory, you must know its

name. Enter the following command to get the file name:

get wfPktCaptureEntry.4.

<line_no.>

is the number displayed after you issued the

get

command in “Creating

an Instance of Packet Capture.” To list the current line numbers associated with

Packet Capture, enter the command

list instances wfPktCaptureEntry

represents the wfPktCaptureFname attribute.

The file name is formatted as follows:

PCAP

<ssnn>

is the slot number.

is a number from 00 to 99.

Example

Enter the following command to display the name of the captured packets

associated with Line No. 102101:

get wfPktCaptureEntry.4.102101

Using FTP to Transfer the File

When you use FTP to get a Packet Capture file, the FTP software transfers it from

the processor’s memory instead of from the media.

The procedure for using FTP to transfer a copy of a file to a Sun workstation or

PC depends on the implementation of FTP on that system. The following

instructions apply to Sun workstations.

If you are using a PC and need instructions for using FTP, refer to the

documentation for the TCP/IP stack installed on the PC.

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 267 268

Sin comentarios

Avaya Troubleshooting Routers Guía para resolver problemas Pagina 226