Avaya Configuring WAN Line Services Manual de usuario Pagina 64

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 294
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 63
Configuring WAN Line Services
2-30
117345-B Rev. 00
Figure 2-7 shows the Sync B Channel Override, WAN Serial Interface Type, and
Async Baud Rate parameters, which are available only for an Octal Sync link
module.
Figure 2-7. Edit SYNC Parameters Window
(4 of 4, Octal SyncLink Module Only)
Setting the B Channel Override
On AN and ANH routers with ISDN support only, you can connect the ISDN
B channel to a specific serial communications controller (SCC). By default, the
B channel is determined by the connector.
You can use the Sync B Channel Override parameter to specify which B channel
this interface is using for ISDN. Select BCHANNEL1 or BCHANNEL2 to
explicitly assign the B channel.
Vista de pagina 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 293 294

Comentarios a estos manuales

Sin comentarios