Avaya Configuring WAN Line Services Manual de usuario descargar pdf (Pagina 147)

Configuring MCE1 and MCT1 Services

117345-B Rev. 00

7-35

To configure ISDN PRI B channels:

Site Manager Procedure

You do this System responds

1. Start at the PRI Logical Lines window

(Figure 7-12)

2. Click on

B Channels

. The MCE1 Timeslots window

(Figure 7-13)

or the MCT1 Timeslots

window opens. This window represents

the timeslots (31 for MCE1, 24 for MCT1).

3. Select a timeslot to assign to the B

channel.

4. Select

B Channel

5. Repeat steps 3 and 4 for each timeslot you

want to assign, or click on

Select All

assign all timeslots to the B channel.

6. Click on

7. Select the B channel in the scroll box.

8. Edit the MTU Size (bytes) parameter for

the B channel. The router uses the MTU to

configure the largest frame that the logical

line can transmit or receive. The PRI MTU

is 1600 bytes by default. You can change it

to any size from 3 to 4608 bytes. See the

MTU Size (bytes) parameter on

page A-40

9. Click on

Apply

10.Click on

Done

. The Configuration Manager window

opens.

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 293 294

Sin comentarios

Avaya Configuring WAN Line Services Manual de usuario Pagina 147