Avaya Configuring WAN Line Services Manual de usuario descargar pdf (Pagina 144)

Configuring WAN Line Services

7-32

117345-B Rev. 00

Valid options are as follows:

• Mark -- This format uses a 0-bit to indicate a state change and a 1-bit to

indicate no state change.

• Space -- This format uses a 1-bit to indicate a state change and a 0-bit to

indicate no state change.

See the NRZI Type parameter on page A-42

for information.

Assigning Timeslots

After configuring logical lines, you configure channels (DS0s) of bandwidth by

grouping 1 to 24 (MCT1) or 1 to 31 (MCE1) contiguous or noncontiguous DS0

timeslots per DS1 frame.

To assign timeslots:

Site Manager Procedure

You do this System responds

1. Start at the MCE1 or MCT1 Logical Lines

window (Figure 7-9)

2. Click on

Timeslots

. The MCE1 Timeslots window or the

MCT1 Timeslots window opens

(Figure 7-10)

. This window represents

the timeslots (31 for MCE1, 24 for MCT1).

3. Click on an

Unused

timeslot. A list of logical lines to which you can

assign the timeslot opens (Figure 7-11)

4. Select the logical line to which you want to

assign the timeslot.

5. Repeat steps 3

and 4 for each timeslot you

want to assign, or click on

Select All

assign all timeslots to a logical line.

6. Click on

. The MCE1 or MCT1 Logical Lines

window opens.

7. Click on

Apply

8. Click on

Done

. The Configuration Manager window

opens.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 293 294

Comentarios a estos manuales

Sin comentarios

Avaya Configuring WAN Line Services Manual de usuario Pagina 144

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring WAN Line Services