Avaya Configuring WAN Line Services Manual de usuario descargar pdf (Pagina 184)

Configuring WAN Line Services

8-24

117345-B Rev. 00

The following sections describe each port action parameter:

Enabling or Disabling BERT Mode

To initiate BERT testing, you must enable BERT mode. By setting the BERT

mode parameter, you enable or disable BERT mode on all logical lines. On these

interfaces, you can enable or disable BERT mode on individual logical lines.

Setting the BERT Alarm Type

You can specify the type of alarm signal to be generated while in BERT mode, or

disable the generation of alarm signals altogether.

Select AIS (alarm indication signal) to transmit Blue alarms (all ones). Select

Yellow to transmit Yellow alarms (all zeros).

Setting the BERT Test Pattern

When a port is in BERT mode, it can generate patterns such as all ones, all zeros,

or a QRSS pattern.

Specify the bit pattern to be transmitted during BERT diagnostics.

Setting the Line-Coding Method

The MCT1 port uses B8ZS transmit and receive line coding by default. You can

select AMI line coding instead.

For a description of these line-coding methods, see “Setting the FT1 Line Coding”

on page 8-7

Section Page

Enabling or Disabling BERT Mode

8-24

Setting the BERT Alarm Type 8-24

Setting the BERT Test Pattern 8-24

Setting the Line-Coding Method 8-24

Setting the Line Type 8-25

Setting FDL Options 8-25

Setting the Signal Level 8-25

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 293 294

Sin comentarios

Avaya Configuring WAN Line Services Manual de usuario Pagina 184