Avaya Configuring WAN Line Services Manual de usuario descargar pdf (Pagina 40)

Configuring WAN Line Services

2-6

117345-B Rev. 00

Enabling or Disabling Synchronous Services

The router enables synchronous line services when you add the circuit. You can

disable and reenable the line without moving the cables.

Using the BCC

state

variable

For example:

sync/4/1# state enabled

sync/4/1# state disabled

Using Site Manager

See the Enable parameter on page A-55 for information.

Enabling or Disabling BofL Messages

The Breath of Life (BofL) parameter enables or disables the transmission of

proprietary BofL messages over a point-to-point connection between the local

router and a remote peer. The exchange of BofL messages provides a level of

confidence in the point-to-point connection. If you enable BofL locally, the

remote peer must also be configured to enable BofL.

Bay Networks recommends that you enable BofL for point-to-point connections

between Bay Networks peers. However, if such a connection is accomplished

through a wide area transport service such as frame relay, X.25, or SMDS, you

must disable BofL.

The router enables BofL messages by default. Disable or enable BofL messages

on the interface.

Using the BCC

bofl

variable

For example:

sync/4/1# bofl enabled

sync/4/1# bofl disabled

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 293 294

Sin comentarios

Avaya Configuring WAN Line Services Manual de usuario Pagina 40