Avaya Configuring WAN Line Services Manual de usuario descargar pdf (Pagina 164)

Configuring WAN Line Services

8-4

117345-B Rev. 00

How you access this window is based on whether or not you have already

configured the port.

• For an unconfigured FT1 link module

The first time you configure a port, the Edit FT1 Clock Parameters window

opens automatically. When you set these clock parameters, you define the

timing sources for the selected port only.

• For a configured FT1 link module

Display the FT1 Port Parameters window (FT1 Connector > Edit Logical

Lines > Port Details > FT1 Port Parameters).

To set the clock parameters:

For the primary or secondary clock, you can set the value to Internal to use the

clock chip on the link module. Otherwise, you can set the value to Port 1 Ext Loop

so that the clock uses the signal coming in from port 1.

Site Manager Procedure

You do this System responds

1. In the window containing the clock

parameters, select a primary clock source

option.

2. Set the

Primary Clock

parameter, using

Help

or see the parameter description on

page A-49

3. Select the secondary (backup) clock

source option.

4. Set the

Secondary Clock

parameter,

using

Help

or see the parameter

description on page A-49

5. Click on

. The FT1 Port Parameters window

(Figure 8-3)

opens.

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 293 294

Sin comentarios

Avaya Configuring WAN Line Services Manual de usuario Pagina 164