Avaya Configuring MPOA Services Manual de usuario descargar pdf (Pagina 58)

Configuring MPOA and NHRP Services

3-12

305861-A Rev 00

To manually specify the LECS ATM address for an MPS, you must set the

following address elements:

• LECS ATM address network prefix

• LECS ATM address user suffix

These two elements together define the full ATM address of the LECS.

Network Prefix

The LECS ATM address network prefix specifies the ATM domain of the MPS.

This 13-byte portion of the ATM address can range from

XX000000000000000000000000 to XXFFFFFFFFFFFFFFFFFFFFFFFF.

The XX byte typically contains 39, 45, or 47. These values define the authority and

format identifier (AFI). The AFI byte identifies the group responsible for

allocating the prefix and the format that the prefix uses. For more information

about the AFI byte, refer to the ATM Forum UNI specification.

User Suffix

The LEC ATM address user suffix typically contains a 6-byte end-station

identifier and a 1-byte selector field. This 7-byte portion of the ATM address can

range from 00000000000000 to FEFFFFFFFFFFFF.

Using the BCC

Using the BCC, you can specify both parts of the address as the value for one

parameter (lecs-address).

To specify a LECS ATM address for the MPS, navigate to the appropriate MPS

prompt and enter:

lecs-address

<20_byte_octet_string>

Note:

The combined network prefix and user suffix must match the address of

the LECS for the network.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 147 148

Sin comentarios

Avaya Configuring MPOA Services Manual de usuario Pagina 58