Avaya Configuring MPOA Services Manual de usuario descargar pdf (Pagina 33)

Starting MPOA and NHRP Services

309249-14.00 Rev 00

2-3

For example, on a System 5000™ router, the following command sequence:

• Creates an ATM interface on slot 5, module 3, connector 1.

• Creates an MPOA service on the ATM interface.

stack# atm slot 5 module 3 connector 1

atm/5/3/1# signaling

<-- (Signaling must be enabled for a new ATM interface.)

signaling/5/3/1# back

atm/5/3/1# mpoa-service

mpoa-service/5/3/1#

On a BLN

/BCN

router, the commands are identical, except that you do not

specify a module number for the ATM interface:

box# atm slot 5 connector 1

atm/5/1# signaling

signaling/5/1# back

atm/5/1# mpoa-service

mpoa-service/5/1#

Using Site Manager

To create an MPOA service using Site Manager, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an ATM link module interface (for

example,

ATM 1

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

MPOA Server Attributes

. The MPOA Server Parameters window

opens.

4. Click on

. The MPOA Service Record window

opens.

5. Go to the next section, “Adding an MPOA

Server,” or go to the next step to exit this

procedure.

6. Click on

Done

. You return to the Edit ATM Connector

window.

(continued)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 147 148

Comentarios a estos manuales

Sin comentarios

Avaya Configuring MPOA Services Manual de usuario Pagina 33

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring MPOA Services