Avaya Configuring MPOA Services Manual de usuario descargar pdf (Pagina 45)

Starting MPOA and NHRP Services

309249-14.00 Rev 00

2-15

At the resulting IP interface prompt, add the desired routing protocol

(RIP or OSPF):

rip

For example, on a System 5000 router, the following BCC commands navigate to

the classical-ip-service named “baltimore” and add IP, RIP, and NHRP to that

service:

stack#

atm/5/3/1

atm/5/3/1#

classical-ip-service servicename baltimore

classical-ip-service/baltimore#

nhrp

nhrp/baltimore#

back

ip/1.2.3.6/255.0.0.0#

rip

rip/1.2.3.6#

When you add NHRP to any ATM Classical IP service, the BCC automatically

creates the global NHRP object at root level if you have not already done so.

Using Site Manager

After you create an ATM SVC service record, the Add Protocols window opens.

To add IP, NHRP, and RIP to an SVC service record, complete the following tasks:

Site Manager Procedure

You do this System responds

1. Click on

. A check mark appears in the IP box.

2. Click on

RIP

. A check mark appears in the RIP box

3. Click on

NHRP

. A check mark appears in the NHRP box.

4. Click on

. The IP Configuration window opens.

5. Set the following parameters:

• IP Address

• Subnet Mask

• Transmit Bcast Address

Click on

Help

or see

Configuring IP, ARP,

RIP, and OSPF Services

for parameter

descriptions.

6. Click on

. The ATM ARP Configuration window

opens.

(continued)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 147 148

Comentarios a estos manuales

Sin comentarios

Avaya Configuring MPOA Services Manual de usuario Pagina 45

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Avaya Configuring MPOA Services