Avaya Configuring MPOA Services Manual de usuario descargar pdf (Pagina 56)

Configuring MPOA and NHRP Services

3-10

305861-A Rev 00

Specifying the MPS Configuration Mode

The MPS configuration mode determines whether the MPS obtains configuration

parameter values (for example, timer settings) automatically from the LAN

emulation configuration server (LECS) or from the manual settings that you

provide. Once you determine the source from which the router must obtain MPS

configuration parameter values, set the MPS configuration mode to either

automatic or manual, accordingly.

In manual mode, you either accept the router’s MPS default timer values or

change those values to suit your requirements (see “Defining MPS Timer Values

”

on page 3-16

You can specify the MPS configuration mode using either the BCC or Site

Manager.

Using the BCC

To specify the configuration mode used by each MPS, navigate to the appropriate

MPS and enter:

config-mode

{

automatic

manual

}

For example, on a System 5000 router, the following commands navigate to

mps/newyork on interface atm/5/3/1 and change the MPS configuration mode

from its default value (automatic) to its alternate value (manual):

stack# atm/5/3/1

atm/5/3/1# mpoa-service/5/3/1

mpoa-service/5/3/1# mps/newyork

mps/newyork# config-mode manual

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 147 148

Sin comentarios

Avaya Configuring MPOA Services Manual de usuario Pagina 56